Most customers install this kit themselves. Some experience with vinyl wrap installation is helpful, but not necessary
Installation time: 4-6 Hours
Recommended Temperature: 65°F – 75°F
Shield your Tesla Cybertruck from road hazards and everyday wear with our premium Steel Protection Film (SPF). This high-quality, self-healing film safeguards your truck's frunk area against fingerprints, bird poop, and bug guts, keeping it looking pristine for years to come. The film also has a hydrophobic layer, making your Cybertruck much easier to clean and stay clean.
This kit is not eligible for returns or refunds.
Most customers install this kit themselves. Some experience with vinyl wrap installation is helpful, but not necessary
Installation time: 4-6 Hours
Recommended Temperature: 65°F – 75°F
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Amazing and precise cutouts for front portion of Cybertruck. Planning now to do rest of vehicle. Thank you Teabros for even making this stuff for us!!!.
Great product and videos to help me DIY.
Perfect for any CyberTruck. Its a must have
Super easy to install the PPF on the hood and front of the CT. A must have if you wrap your Truck
Bundle comes with high quality PPF and tools necessary to install easily.
Does a great job making cleanup of the front area super easy.