.svg?v=144615871337664008991726520056)
Avoid paint and car damage from rocks and debris with these clear, easy-to-install kits. It includes PPF kits for your full rockers, rear trunk, headlight and fog-lights, taillights, front bumper lip, door edges, and door handles.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 3 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Pros: Decent priced bundle with definitely abundant instrunctions and included tools. Rockers were easy to put on.
Cons: Putting on the headlights definitely is not even intermediate level and even the instructions video seems to not highlight how to figure getting rid of wrinkles. After 45 min of trying I gave up and decided to not put it all together. Will try to post a pic if I can. I wish the bundle had an option to not include this and made the price cheaper instead.
Also the taillights were confusing to apply as well due to an extra pair of cutout included (probably for model Y or a different year model 3) that didn't fit. Also the side tail lights were not easy to put on and left bubbles or smudges. I even had to take out the one on the charger. Not sure why it had to be made 2 piece install instead of one. Some of the instructions were confusing around the usage of tack solution and how to prepare with water (and should it be needed or not and when).
Request to Test bros: Please consider labelling where possible which is #1,2,3 in the roll so as to make the decision making go faster and not having to spend time calculating and confirming if you have the right sized or placed part for the driver or passenger side. only the rockers had a cut out of D or P (which was also easy to miss)
This kit had everything I needed and the detailed videos showed every nuance of installation for my vehicle. It was like I had a professional installer looking over my shoulder giving me tips.
Great Quality and fit for my model 3!!
Very good range supplied to cover problem areas of my car
