.svg?v=144615871337664008991726520056)
With 45% transmittance, you get the luxury of a sleek look paired with protection. This PPF protects the light of your life from rocks and other debris that will inevitably fly up while driving.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: .5 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
I did the full DIY front PPF wrap but swapped the headlights PPF with the tinted and it makes a huge difference. I love that it includes the fog lights as well and it’s most noticeably different at night!
The item was great and customer support from TESBROS was amazing, I needed some assistance with a product and they were quick and responsive.
Easy to install and provided videos and everything you need to do this easily.
Product is legit, customer service is 2nd to none.
Perfect tint level to darken but the lights are still plenty bright. Maybe better than untinted because the harsh glare that sometimes reflects off road signs is gone.
