.svg?v=144615871337664008991726520056)
With 45% transmittance, you get the luxury of a sleek look paired with protection. This PPF protects the light of your life from rocks and other debris that will inevitably fly up while driving.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
It was amazing! One of my Tesla lights happen to go out and they sent me another free of charge for the tint :)
Fast delivery and everything you need for an easy install
The tinted headlight protection film and the installation kit that came with it were amazing. The kit simplified the process and the squeegee’s in the kit were really good quality. The first headlight took me longer to install, but once I got the hang of it, it took literally 20 mins to complete the headlights and fog lights. Looks amazing. Highly recommend getting these. They are easy to install and made the front of my 2023 Model S Plaid look even more aggressive.
The tint is not too dark, not too light, just right. The cut is a perfect fit for headlights and fog lights and the instructional video is very helpful - don't skimp on the slip spray.
The instructions and videos are great. Installation was straightforward. Thanks!!
