.svg?v=144615871337664008991737747827)
This kit comes with everything to protect this high-impact area from avoidable damage.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
PPF is best installed in a temperature range between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it still persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
@teslabros
Exceptional!!!! This was 100% amazing! You guys are super with communication and I appreciate how you helped me out when I ruined one of the pieces. My Cybertruck looks amazing now and everyone keeps asking how I changed it to black!
Daniel
united states
Amazing! The instructional videos were so helpful and covered every step required for applying. Easy to follow along. Some pieces take a little more time and attention. Overall love it!
Jordann
united states
Transformed!! I really wanted to stand out from all the other white model 3s, so I ordered the pillar delete. Everything was pre-cut to fit. This was my first time applying and I couldn't be more happier with the results. The kit came with all the tools needed. Excellent product and excellent service with Tesbros!
Edward
united states
M3P install this past weekend, first timer. Experience overall was good...having a 2nd person helps a lot. Glad it’s done and protected, cheers!
Alex
united states
Fantastic Product. This kit was top notch quality from packaging to tutorial vids, tools and film. The application was very doable for the DIY novice and I'm super impressed with my results. Definitely will recommend..10 out of 10 plus 10!
Michele
united states
Protection kit works and easy DIY instructions. Great product!
Tiffany
united states
Our DIY Protection Kit offers durable, easy-to-apply materials to shield your Tesla from everyday damage.
Shields key spots like door handles, mini rockers, and B-pillars from scratches, chips, and daily wear.
Our protection film is lightweight yet durable, making application a breeze.
Each piece is precision cut for a seamless fit on your Tesla’s most vulnerable small surfaces.
Your Pre-Cut PPF Protection
All Required Tools Included
Step-by-Step Installation Guide
Placed this on my new Model 3 before getting any scratches. Great way to add protection for a first time PPF application. Now I’m ready to tackle the door sill and trunk PPF.
Like everything else from Tesbros, this was also easy to install. It was precut and clearly labeled for driver or passenger so very easy to put on. I bought this because I saw how my nephew and niece were climbing in and out of the car. Wanted to protect the soft paint from scratches.
I watched the video to help me install. Take your time on this one. Spray the "tack" bottle which is just water to displace the slip solution to help the PPF stick better. Work form the inside to the outside. Parking it in the sun will help it dry.
Install went well, except the instructions should state to not close your door for 24 hours after install. I waited a few hours, closed the door only to find that the rubber seal of the door had stretched the PPF and caused slight overhang which I imagine would cause the piece to lift eventually. I removed the pieces and re-ordered. Second instance came out perfect once the PPF had been given adequate time to adhere.
Easy to install. Another great product made by tesbros.
