.svg?v=144615871337664008991726520056)
Avoid paint and car damage from rocks and debris with these clear, easy-to-install kits. It includes ppf kits for your full rockers, rear trunk, headlight and fog-lights, taillights, door edges, and door handles.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 3 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Overall a mixed response. few items are useless. And the door edge films are not covering enough area. And Taillight PPF are misaligned with small holes. Headlight PPF has alignment issues. Among all these items, I liked only the door handle area PPF only.
The order was received quickly and as advertised. Products seem to be good material and fit as expected. Time will tell about quality but so far so good.
Easy instructions, really needed to protect the car!
Installation is pretty straightforward with the help of watching the videos. After doing a couple sections and getting the hang of it, was able to complete with ease. Definitely recommend.
packaged well and separated and ready for install
