Forgot to get a gift? Get gift cards at a discount! CODE: TESGIFT

    DIY Protection Kit for Model Y

    Tempered Glass (9H) Screen Protector for Model 3/Y

    Exterior High Wear Protection Bundle for Model S Refresh (2021+)

    Exterior High Wear Protection Bundle for Model S Refresh (2021+)

    Bundle Savings

    Free Continental U.S. Shipping $99+

    Installation Level: Intermediate

    Installation Intermediate

    Free Video Guides

    All Tools Included

    USA Support

    No matter how careful you are with your Tesla, the unknown elements can be the most damaging.

    Avoid paint and car damage from rocks and debris with these clear, easy-to-install kits. It includes PPF kits for your rockers, rear trunk, headlights, fog lights, taillights, door edges, and door handles.

    • Easy DIY peel & apply application (see below)
    • Tools & instructions included
    • Lasts 10 years
    • Designed and made in the USA

    Includes:

    • Mini Rockers
    • Rear Trunk
    • Headlights + Fog Lights 
    • Taillights
    • Door Edge guards
    • Door Handles
    • Squeegee
    • Slip Bottle
    • Tack Bottle
    • Install Guides

    Specs:

    • Made out of Avery Supreme PPF
    • Fits 2021+ Tesla Model S

    Can I install PPF over ceramic coating?

    Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.

    How long should I wait to drive my Tesla after installing PPF?

    We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.

    What temperature should I install PPF?

    PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.

    How do I remove wrinkles (also called fingers) when installing?

    If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.

    Is it okay to leave small bubbles when installing?

    If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.

    How long should I wait before cleaning my Tesla after installing it?

    We recommend waiting at least 24 hours but 48 hours to be safe.

    Does it come with everything I need to install?

    Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.

    Do I need to cut anything?

    No, our kits come pre-cut to make installation easier for you!

    Can I use a pressure washer to wash my car after installing the ppf?

    You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.

    Why does it only come with 1 set?

    PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.

    How long does PPF last?

    Our film is rated for 10 years.

    Can I put a ceramic coating over PPF?

    Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!

    Easy 30-day Returns. We're giving you 30 days to see if the kit works for you. Wrong color? Not for you? Get an exchange or refund. To receive a full refund, the product must not be used. If unused or sealed, we will refund 100% minus the shipping costs. For full details on policies, please visit our Exchanges and Return Page.

    Lifetime Vinyl/PPF Warranty: Have an issue with our kits? We'll send you a replacement. Just cover the shipping. Contact us at: support@tesbros.com