Installation: Power Trunk (Latest Edition: Hansshow V7) for Model 3

Most customers install this themselves.We recommend watching the how to video to ensure correct usage.

Installation time: 4 hours

Tools needed: 

• T40 Torx bit
• T25 Torx bit
• 8mm Socket
• 10mm Socket
• 13mm Socket
• Ratchet 8mm
• Wrench 6” impact extension
• Electrical Tape
• Painter’s Tape Drill
• Pry tools (the kit does come with some)
• Fish wire (the kit comes with a short one, but I prefer using a longer one for pulling leverage)
• WD40 Silicone Lubricant Gloves
• Flathead screwdriver
• Floodlight/flashlight/headlight (a light you can use easily to see in the tight spaces)

How to Video: