.svg?v=144615871337664008991726520056)
Contrary to their name, these mini rockers are a game-changer for protection. This kit comes with everything you need to protect this section of your rockers.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: .5 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Easy to install I got one side done right for which I was your picture and the other side and I’m dropping while installing so it got messed up and I’m hoping that after contacting customer service they will send me one piece out to replace the other side
These mini rockers are fantastic and offer great protection from debris and rock chips that might fly up. Gotta give it to Tesbros for having those awesome tutorial videos too, made the whole process super easy to install.
Was easy to install no issues.
Ordered for my 2024 Model 3 Highland. The upper piece went on as expected. The lower piece of PPF was clearly not for my car - it was too big - even though the item said it was for the 2024 Highland. Unfortunately, I did not realize that until after I removed the backing and applied the slip solution. Forced me to cut off the lower 3/4 inch or so with a scissors - as I was installing it. Ended up being kind of a hack job on the lower piece on both sides. One of them is already peeling off - perhaps I overhandled it with multiple fittings and trimming.
I’m in the middle cause the bottom piece was a little over sized. It’s on the bottom so doesn’t really bother me
