- 8 Door Edge Strips
- Install Guide
This kit comes with 4 long and 4 regular trim-to-fit strips for a quick no nonsense install. Your door edges will thank you.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Designed for DIY-ers |No cutting required. Pre-cut kits with step by step video installation guides.
All Tools Included | Professional-grade tools for a smooth installation
Guaranteed success| Free replacement program. USA support help.
Lasts up to 10 years| High quality protection film from Avery Dennison.
Our PPF kits are precision-cut to fit perfectly, offering a nearly invisible layer of protection that guards against scratches, chips, and road debris. Keep your Tesla looking brand new for years to come.
These kits are designed for a simple DIY installation. With no cutting required, and easy-to-follow video guides, anyone can achieve professional-level results from the comfort of their garage.
Our PPF is built to last up to 10 years, preserving your Tesla’s finish against daily wear and tear. Plus, it's self-healing, so minor scratches disappear with heat. Learn more about PPF >
Installation was really easy and Tesbros provided more than what was needed for Model 3 so don’t have to worry about making mistakes. Most of all, price was reasonable. Highly recommend.
Make sure you working in a lighted area Ppf is clear and if you’re not paying attention it can go on uneven best yet just follow the install video from TESBROS as long as you follow the video you can get it done I messed up mine and couple of areas but luckily I have another set to work with as TESBROS send you 2 sets of 4 with 2 different t lengths good and easy way to protect your doors from unintentional damage
Application is very straightforward and easy to apply around curves and edges.
I was unnecessarily concerned by this install (my first PPF experience). Great product with excellent installation instructions.
If you take your time and don’t force the application at the curviest parts of the edge, it can come out quite nice.