Free Shipping for US Continental Orders $99+

    DIY Protection Kit for Model Y

    Tempered Glass (9H) Screen Protector for Model 3/Y

    Tinted Light Bar Protection - PPF for Cybertruck

    New

    Tinted Light Bar Protection - PPF for Cybertruck

    New
    Color: Tinted - 45% Transmittance
    Tinted - 45% Transmittance

    Free Continental U.S. Shipping $99+

    Installation Level: Beginner

    Installation Beginner

    Free Video Guides

    All Tools Included

    USA Support

     

    Darken and Protect your Light Bar

    This PPF darkens (45% VLT) and protects your light from rocks and debris that will inevitably fly up while driving.

    • Easy DIY peel & apply application (see below)
    • Tools & instructions included
    • Lasts 10 years
    • Designed and made in the USA

    Includes:

    • Tinted Light Bar PPF
    • Tinted Driver and Passenger Foglight PPF
    • Squeegee
    • Slip Bottle
    • Tack Bottle
    • Install Guide

    Specs:

    • Made out of STEK DynoSmoke
    • Fits 2023+ Cyber Truck 

    Most customers install this kit themselves. Some experience with vinyl wrap installation is helpful, but not necessary

    Installation time: 15 minutes

    Recommended Temperature: 65°F – 75°F

    How to Video: 

    Can I install PPF over ceramic coating?

    Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.

    How long should I wait to drive my Tesla after installing PPF?

    We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.

    What temperature should I install PPF?

    PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.

    How do I remove wrinkles (also called fingers) when installing?

    If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.

    Is it okay to leave small bubbles when installing?

    If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.

    How long should I wait before cleaning my Tesla after installing it?

    We recommend waiting at least 24 hours but 48 hours to be safe.

    Does it come with everything I need to install?

    Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.

    Do I need to cut anything?

    No, our kits come pre-cut to make installation easier for you!

    Can I use a pressure washer to wash my car after installing the ppf?

    You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.

    Why does it only come with 1 set?

    PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.

    How long does PPF last?

    Our film is rated for 10 years.

    Can I put a ceramic coating over PPF?

    Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!

    Easy 30-day Returns. We're giving you 30 days to see if the kit works for you. Wrong color? Not for you? Get an exchange or refund. To receive a full refund, the product must not be used. If unused or sealed, we will refund 100% minus the shipping costs. For full details on policies, please visit our Exchanges and Return Page.

    Lifetime Vinyl/PPF Warranty: Have an issue with our kits? We'll send you a replacement. Just cover the shipping. Contact us at: support@tesbros.com