Black Friday Deals Are Here! Up to 30% Off | Code: WattaBargain SHOP NOW

    DIY Protection Kit for Model Y

    Tempered Glass (9H) Screen Protector for Model 3/Y

    Complete Chrome Delete Kit for Models 3, S, & X

    Stealth Bundle for Model 3 & Y

    Taillight Protection - PPF for Cybertruck

    New

    Taillight Protection - PPF for Cybertruck

    New

    Free Continental U.S. Shipping $99+

    Installation Level: Beginner

    Installation Beginner

    Free Video Guides

    All Tools Included

    USA Support

    Give your Tesla a sleek look without sacrificing light intensity.

    With 45% transmittance, you get the luxury of a sleek look paired with protection. This kit comes with everything you need to protect your taillights while also vented to allow normal condensation evaporation. It also won’t interfere with the touch to open on the charge port.
    • Easy DIY peel & apply application (see below)
    • Tools & instructions included
    • Lasts 10 years
    • Designed and made in the USA

    Includes:

    • Taillight Bar PPF
    • Squeegee
    • Slip Bottle
    • Tack Bottle
    • Install Guide

    Specs:

    • Made out of Avery Supreme PPF
    • Fits 2023+ Cybertruck

    Most customers install this kit themselves. Some experience with vinyl wrap installation is helpful, but not necessary

    Installation time: 15 minutes

    Recommended Temperature: 65°F – 75°F

    How to Video: 

    Can I install PPF over ceramic coating?

    Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.

    How long should I wait to drive my Tesla after installing PPF?

    We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.

    What temperature should I install PPF?

    PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.

    How do I remove wrinkles (also called fingers) when installing?

    If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.

    Is it okay to leave small bubbles when installing?

    If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.

    How long should I wait before cleaning my Tesla after installing it?

    We recommend waiting at least 24 hours but 48 hours to be safe.

    Does it come with everything I need to install?

    Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.

    Do I need to cut anything?

    No, our kits come pre-cut to make installation easier for you!

    Can I use a pressure washer to wash my car after installing the ppf?

    You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.

    Why does it only come with 1 set?

    PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.

    How long does PPF last?

    Our film is rated for 10 years.

    Can I put a ceramic coating over PPF?

    Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!

    Easy 30-day Returns. We're giving you 30 days to see if the kit works for you. Wrong color? Not for you? Get an exchange or refund. To receive a full refund, the product must not be used. If unused or sealed, we will refund 100% minus the shipping costs. For full details on policies, please visit our Exchanges and Return Page.

    Lifetime Vinyl/PPF Warranty: Have an issue with our kits? We'll send you a replacement. Just cover the shipping. Contact us at: support@tesbros.com
    4.0
    Rated 4.0 out of 5 stars
    Based on 2 reviews
    Total 5 star reviews: 1 Total 4 star reviews: 0 Total 3 star reviews: 1 Total 2 star reviews: 0 Total 1 star reviews: 0
    50%would recommend this product
    Customer-uploaded media carousel. Press left and right arrows to navigate. Press space or enter to open more details.
    Slide 1 selected
    2 reviews
    • MH
      Michael H.
      Flag of United States
      Verified Buyer
      4 months ago
      Rated 3 out of 5 stars
      Ok, but expensive for what you get

      The front DRL and headlight pieces were the right size, this one was not. Even trying to stretch across the tailgate, it was nearly an inch short.

      The corner pieces fit fine, but I did get a small amount of edge peel for some reason.

      Overall, I think these would be 4 star if they cost $50, 5 star if they cost $40.

    • RP
      Ryan P.
      Flag of United States
      Verified Buyer
      4 months ago
      Rated 5 out of 5 stars
      Went on great

      I’m a newb and not very good at doing this kind of stuff and I managed to get it applied and I am happy with the results

    Reviews LoadedReviews Added