⚠ Please choose Bundle Parts
テスラ モデルY ジュニパーを飛び石、傷、そして厄介な虫から守るDIYフロントプロテクションキット。取り付けが簡単なこの包括的なキットには、愛車を美しく保つために必要なものがすべて揃っています。
Yes, this kit was designed with beginners in mind! If this is your first PPF install, watch this video to see how it's done before you purchase!
Nope! We designed this kit for the average Joe. We include everything you need to learn as you go.
We include in-depth courses that walk you through the installation process. Other kits require prior PPF knowledge, while ours is completely beginner-friendly.
Not at all! Our kit was carefully designed to fit without removing anything or having to use a knife on the car.
All kits are final sale. Since it's not good for the roll to stay on the shelf, we cut to order. Unless there was a special case, your kit would not be returnable so please review the intro courses to see if this is a good fit for you.
We use Avery Supreme Defense PPF that is rated for 10 years of durability. The film will not yellow or crack over time.
This can depend on the person, but we estimate it will take 12-18 hours if installed alone.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
@teslabros
最高です!!!! 本当に最高でした!皆さんのコミュニケーションは素晴らしく、部品の一つを壊してしまった時にも助けてくれて本当に感謝しています。サイバートラックは今では見事に輝き、みんなどうやって黒に変えたのか聞いてきます!
ダニエル
アメリカ合衆国
すごい!説明動画はとても役立ち、貼り付けに必要な手順をすべて網羅していました。手順は分かりやすかったです。パーツによっては、少し時間と注意が必要なものもありますが。全体的にとても気に入りました!
ジョーダン
アメリカ合衆国
大変身!他の白いモデル3と一線を画したかったので、ピラーデリートを注文しました。全てがぴったり合うようにカットされていました。初めての取り付けでしたが、仕上がりに大満足です。キットには必要な工具がすべて揃っていました。Tesbrosの製品とサービスは素晴らしかったです!
エドワード
アメリカ合衆国
先週末、M3Pのインストールを初めて行いました。全体的に良い経験でした…2人目の人がいてくれたので本当に助かりました。無事に完了し、保護されてよかったです。乾杯!
アレックス
アメリカ合衆国
素晴らしい製品です。このキットは、パッケージからチュートリアル動画、工具、フィルムに至るまで、すべて最高品質でした。DIY初心者でも簡単に施工でき、仕上がりにも大変満足しています。絶対にお勧めします。10点満点中10点です!
ミシェル
アメリカ合衆国
保護キットは機能的で、DIYの説明も分かりやすいです。素晴らしい製品です!
ティファニー
アメリカ合衆国
当社の DIY 保護キットには、Tesla を日常的なダメージから保護するための、耐久性があり簡単に貼り付けられる素材が揃っています。
傷、欠け、環境によるダメージを受けやすい重要な部分を完全にカバーします。
当社の保護フィルムは軽量でありながら耐久性に優れているため、簡単に貼り付けることができます。
調節可能なポーチと同様に、当社のキットを使用すると、Tesla の特定の領域に合わせて保護を調整できるため、常に完璧にフィットします。
We typically have PPF professionally installed on our new vehicles, but our last experience wasn’t great—the edges started to lift, and dirt collected underneath. When we purchased our Model Y Juniper, we decided to try the Tesbros DIY PPF kit based on all the positive reviews and installation videos.
The provided instructions and videos were very helpful—I suggest watching them a couple of times before starting. I realized that my previous installer likely didn’t prep the car as thoroughly as Tesbros recommends, which caused my earlier issues. Prep is key: clean the car thoroughly, especially the crevices, and seal all the edges with the TAC solution.
The kit comes with alcohol and slip solution, with the slip portion pre-measured in a packet for the included spray bottle, which made things very easy. Unfortunately, one of the two spray bottles included in the kit was defective, so I had to purchase another one to complete the job.
I prepped my garage and car Saturday night, then installed everything on Sunday. I was able to complete the front bumper, full hood, and full fenders in one day. One tip: definitely remove the fender camera as shown in the Tesbros video—it makes the process much smoother.
The results were excellent. I made a mistake on the bumper, but Tesbros sent me a replacement, which I really appreciated. After finishing, I let the car sit out in the New Mexico sun, and within a couple of days, the small bubbles I had left disappeared.
At first, I was…
Installing the Tesbros full front PPF kit on my refreshed Model Y Juniper was surprisingly smooth. The pre-cut pieces fit the updated body lines perfectly, especially around the hood and bumper contours. Their video instructions were clear and paced well—ideal for a first-time installer. With the right slip/tack solution and a bit of patience, I got a clean, bubble-free finish that looks factory-grade. The film is practically invisible and hugs the curves beautifully. For a DIY job, the fit and finish exceeded expectations.
It was my first time doing this and it came out pretty well. Instructions and everything you need is included.
Very precise cut that fits perfectly !!!
The PPF kit was complete with more than what I needed to get the job done.
The video tutorials were really clear and I would have really made a mess if I didn't follow them to the "T".
I made a couple mistakes because I rushed a couple places and wasn't as thorough as I could have been however, the finished job really came out good.
Use the slip solution 2x more than you think. Make sure the WHOLE piece can move during the whole time. Tac your anchors with care and patience and don't skip a tac/anchor location, it will all come together with patience.