⚠ Please choose Bundle Parts
テスラ モデル3 ハイランドを飛び石、傷、そして厄介な虫から守るDIYフロントプロテクションキット。取り付けが簡単なこの包括的なキットには、愛車を美しく保つために必要なものがすべて揃っています。
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
Not at all! Our kit was carefully designed to fit without removing anything or having to use a knife on the car.
We use Avery Supreme Defense PPF that is rated for 10-years of durability. The film will not yellow or crack over time.
Nope! We designed this kit for the average Joe. We include everything you need to learn as you go.
This can depend on the person, but we estimate it will take 8-12 hours if installed alone.
We include in-depth courses that walk you through the installation process. Other kits require prior PPF knowledge, while ours is completely beginner-friendly.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
@teslabros
最高です!!!! 本当に最高でした!皆さんのコミュニケーションは素晴らしく、部品の一つを壊してしまった時にも助けてくれて本当に感謝しています。サイバートラックは今では見事に輝き、みんなどうやって黒に変えたのか聞いてきます!
ダニエル
アメリカ合衆国
すごい!説明動画はとても役立ち、貼り付けに必要な手順をすべて網羅していました。手順は分かりやすかったです。パーツによっては、少し時間と注意が必要なものもありますが。全体的にとても気に入りました!
ジョーダン
アメリカ合衆国
大変身!他の白いモデル3と一線を画したかったので、ピラーデリートを注文しました。全てがぴったり合うようにカットされていました。初めての取り付けでしたが、仕上がりに大満足です。キットには必要な工具がすべて揃っていました。Tesbrosの製品とサービスは素晴らしかったです!
エドワード
アメリカ合衆国
先週末、M3Pのインストールを初めて行いました。全体的に良い経験でした…2人目の人がいてくれたので本当に助かりました。無事に完了し、保護されてよかったです。乾杯!
アレックス
アメリカ合衆国
素晴らしい製品です。このキットは、パッケージからチュートリアル動画、工具、フィルムに至るまで、すべて最高品質でした。DIY初心者でも簡単に施工でき、仕上がりにも大変満足しています。絶対にお勧めします。10点満点中10点です!
ミシェル
アメリカ合衆国
保護キットは機能的で、DIYの説明も分かりやすいです。素晴らしい製品です!
ティファニー
アメリカ合衆国
当社の DIY 保護キットには、Tesla を日常的なダメージから保護するための、耐久性があり簡単に貼り付けられる素材が揃っています。
傷、欠け、環境によるダメージを受けやすい重要な部分を完全にカバーします。
当社の保護フィルムは軽量でありながら耐久性に優れているため、簡単に貼り付けることができます。
調節可能なポーチと同様に、当社のキットを使用すると、Tesla の特定の領域に合わせて保護を調整できるため、常に完璧にフィットします。
First of all, TESBROS’ customer service is amazing, which is why bought from them rather than a competitor. The instruction videos are very good. If you watch them, you’ll be able to install the kit. A few lessons I’ve learned in the process:
1. This is not particularly hard. It is particularly time consuming, so you’ll have to be patient to get good results. It took me 4 hours to prep the environment (vacuuming walls and floor of the garage) and the car (washing, prep washing, and claying). I’ve spent 24 hours installing film and am halfway through the kit (doors, fenders, front bumper, mirrors, and pillars). In summary, be mentally ready for a 50-hour project.
2. Work from easier to harder panels to get practice. Pillars > Hood > Doors > Mirrors > Trunk > Quarter Panels > Fenders > Rockers > Back Bumper > Front Bumper
3. Double check for issues as you go. Before doing a second squeegee pass on an area (what they call a “double take”), wipe it dry and check for contamination and bubbles. It’s much easier to fix problems at that point than after the whole panel is done.
4. Overhang should be at least ~5mm for edges to be wrapped, stretching the film if needed. Stop just short of the edge everywhere else. Stopping 1mm short of the edge is better leaving 1mm overhang, as you may not be able to wrap that and have to resort to cutting.
5. Tack edges and let them dry for a few hours prior to wrapping them. Sometimes you’ll have to apply pressure and hold for a couple of…
I recently installed this on my 2025 Model 3 the day of delivery and highly recommended the full front kit. The set by step video instructions were excellent and I had no issues installing. Everything was cut perfectly and seemed of excellent quality. I had no experience with PPF prior to this install and everything come out nearly perfect!
Love the new design with single piece fenders. Easier to install and quicker.
You know Ji cares when he takes the time to video every step and provide tips along the way! Watch the videos and do the practice kit and you'll be fine. Plan for a day to prep and a day to install. Very happy with the quality of film and kit. Buy the insurance in case you mess up, and a color match paint pen to fix any chips after final prep.
With all of the hazards and rocks in my area, ppf is a must. I dont know why I didnt do it sooner on other cars.
I debated whether or not to have ppf professionally installed or do it myself before coming across Tesbros front diy ppf kit for my highland 3. Ji makes it look fairly easy on the install videos, but it’s really not. My install was far from perfect, but the tesbros support team was quick to respond and helped me fix my issues. If you can follow directions and have the patience/time, it will definitely be worth it! But you will need to dedicate a whole day to get this done.