ほとんどのお客様はこのキットを自分で取り付けます。 PPF インストールに関するある程度の経験は役に立ちますが、必須ではありません
取り付け時間: 15分
推奨温度: 65°F – 75°F
必要なツール:付属の取り付けボトルに水を加えるだけです。
ビデオの作り方:
Free Continental U.S. Shipping $99+
30-Day Returns
このキットには、この衝撃の大きいエリアを回避可能な損傷から保護するためのすべてが付属しています。
ほとんどのお客様はこのキットを自分で取り付けます。 PPF インストールに関するある程度の経験は役に立ちますが、必須ではありません
取り付け時間: 15分
推奨温度: 65°F – 75°F
必要なツール:付属の取り付けボトルに水を加えるだけです。
ビデオの作り方:
PPFは65~75°F(約18~23℃)の温度範囲で設置するのが最適です。温度が低すぎると硬くなり、高すぎると伸びやすくなります。
指が小さい場合は、タック溶液を塗ってからスクイージーで押し下げるのが最も簡単です。それでも落ちない場合は、スクイージーをマイクロファイバーで包んで押し下げてください。マイクロファイバーが水分を吸収し、粘着力が増します。
5セント硬貨より大きい場合は、PPFを持ち上げて再びスクイジーで押し下げます。5セント硬貨より小さい場合は、時間の経過とともに拡散して蒸発するはずです。
はい、必要なものはすべてキットに含まれています。スリップアンドタックボトルに水を入れるだけです。
いいえ、当社のキットは事前にカットされているので、簡単に設置できます。
PPFはウェットインストールのため、乾式インストールのビニールよりも調整が簡単です。万が一、間違えた場合はご連絡ください。実費にて交換品をお送りいたします。
私たちの映画の鑑賞期限は10年です。
@teslabros
最高です!!!! 本当に最高でした!皆さんのコミュニケーションは素晴らしく、部品の一つを壊してしまった時にも助けてくれて本当に感謝しています。サイバートラックは今では見事に輝き、みんなどうやって黒に変えたのか聞いてきます!
ダニエル
アメリカ合衆国
すごい!説明動画はとても役立ち、貼り付けに必要な手順をすべて網羅していました。手順は分かりやすかったです。パーツによっては、少し時間と注意が必要なものもありますが。全体的にとても気に入りました!
ジョーダン
アメリカ合衆国
大変身!他の白いモデル3と一線を画したかったので、ピラーデリートを注文しました。全てがぴったり合うようにカットされていました。初めての取り付けでしたが、仕上がりに大満足です。キットには必要な工具がすべて揃っていました。Tesbrosの製品とサービスは素晴らしかったです!
エドワード
アメリカ合衆国
先週末、M3Pのインストールを初めて行いました。全体的に良い経験でした…2人目の人がいてくれたので本当に助かりました。無事に完了し、保護されて良かったです。乾杯!
アレックス
アメリカ合衆国
素晴らしい製品です。このキットは、パッケージからチュートリアル動画、工具、フィルムに至るまで、すべて最高品質でした。DIY初心者でも簡単に施工でき、仕上がりにも大変満足しています。絶対にお勧めします。10点満点中10点です!
ミシェル
アメリカ合衆国
保護キットは機能的で、DIYの説明も分かりやすいです。素晴らしい製品です!
ティファニー
アメリカ合衆国
当社の DIY 保護キットには、Tesla を日常的なダメージから保護するための、耐久性があり簡単に貼り付けられる素材が揃っています。
ドアハンドル、ミニロッカー、B ピラーなどの重要な場所を傷、欠け、日常的な摩耗から保護します。
当社の保護フィルムは軽量でありながら耐久性に優れているため、簡単に貼り付けることができます。
各パーツは精密にカットされており、Tesla の最も傷つきやすい小さな表面にシームレスにフィットします。
プレカットPPF保護
必要なツールがすべて含まれています
ステップバイステップのインストールガイド
Matte finish door sill protectors all you have to do is contact customer service and request matte finish PPS same cost no up charge I actually end up receiving the gloss finish PPF even though I emailed customer service after placing order but customer service was quick and efficient to address the issue and they send me out a matte finish PPF for my door sill Kaaris and guess what else they didn’t just send me one said they sent me two sets of matte finish PPS just in case if I mess up two thumbs up for TESBROS
Easy to install and will definitely protect the sill but I do not like the gloss finish so I recommend getting a matte finish PPF all you have to do is request customer service and they can produce one in matt finish for you for the same price
I went ahead and installed the door sill protector even though I immediately realized this is not the area I scuff getting in and out of the car. I scuff the door sill area below it, perhaps because I am only 5‘2“? I have a photo following a recent road trip, I’d like to share if I can locate the option to upload a photo. It’s actually laughable seeing how clean the protector is and how dirty and scuffed the area below it is. My only solution at this point is to mentally remind myself to lift my feet because I clearly don’t even realize I’m doing this damage until after it has occurred and I don’t see a similar product for the lower area.
Truly sorry this didn't solve your issue. We do have a product for the entry piece!
Model 3: https://tesbros.com/collections/model-3-accessories/products/model-3-door-entry-ppf
Model Y: https://tesbros.com/collections/model-y-accessories/products/y-door-entry-ppf
Good product, easy to install, fits well.
Great product, very easy to apply. Keeps door sill safe from scratches.