Most customers install this kit themselves but it can be completed by a auto shop. Tools ARE required for this installation.
Installation time: 2-4 Hours
DISCLAIMER: This installation requires drilling a hole in the steel tailgate.
While the front camera has a built-in washer, the rear camera does not. Keep your rearview camera clean and functional with the easy-to-use ClearVu washer. Tap into the OEM hose for the front sprayer and ensure clear visibility while completing your truck tasks.
Most customers install this kit themselves but it can be completed by a auto shop. Tools ARE required for this installation.
Installation time: 2-4 Hours
We tap into the OEM hose for the front sprayer using a t-valve. This allows you to use the same button that you use for the front sprayer.
Absolutely. However, this is an advanced install so we recommend for extreme DIY-ers. Drilling into the hard steel is no joke and that's the most difficult part of the install.
Yes, unfortunately. We tried to figure out other solutions but realized that it was our only choice.
Tools are NOT included. However, all the other pieces are included in the kit.
Yes, there are quite of a disassembly for the install. You'll have to disassemble the frunk, tailgate and the fender flares.
No, it should not void any warranty.
It can take up to 4 hours depending on the person.
Washer is working well, followed Tesbros online video instructions and worked out.
Took about 3 hours to install.
The product works very well. The installation was relatively simple. My recommended method for the installation. First drill the 5/16 hole using a step bit (5 min). Next run the tubing from the reservoir to the tailgate. Remove the light without disconnecting the camera and rest it on top of the tailgate. Now install the tubing by following the existing wiring for the light. Install the spigot and connect the check valve in-line with the tubing. Simple.