.svg?v=144615871337664008991737747827)
This kit comes with everything to protect this everyday used area from avoidable damage.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 10 minutes
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
@teslabros
Exceptional!!!! This was 100% amazing! You guys are super with communication and I appreciate how you helped me out when I ruined one of the pieces. My Cybertruck looks amazing now and everyone keeps asking how I changed it to black!
Daniel
united states
Amazing! The instructional videos were so helpful and covered every step required for applying. Easy to follow along. Some pieces take a little more time and attention. Overall love it!
Jordann
united states
Transformed!! I really wanted to stand out from all the other white model 3s, so I ordered the pillar delete. Everything was pre-cut to fit. This was my first time applying and I couldn't be more happier with the results. The kit came with all the tools needed. Excellent product and excellent service with Tesbros!
Edward
united states
M3P install this past weekend, first timer. Experience overall was good...having a 2nd person helps a lot. Glad it’s done and protected, cheers!
Alex
united states
Fantastic Product. This kit was top notch quality from packaging to tutorial vids, tools and film. The application was very doable for the DIY novice and I'm super impressed with my results. Definitely will recommend..10 out of 10 plus 10!
Michele
united states
Protection kit works and easy DIY instructions. Great product!
Tiffany
united states
Our DIY Protection Kit offers durable, easy-to-apply materials to shield your Tesla from everyday damage.
Shields key spots like door handles, mini rockers, and B-pillars from scratches, chips, and daily wear.
Our protection film is lightweight yet durable, making application a breeze.
Each piece is precision cut for a seamless fit on your Tesla’s most vulnerable small surfaces.
Your Pre-Cut PPF Protection
All Required Tools Included
Step-by-Step Installation Guide
I’ve installed the Mud Flaps/PPF and the B pillar PPF. The PPF supplied has been more difficult to work with than the videos portray. In each case, I’ve had apply, lift, and re-tack the PPF multiple times with the initial install. No matter how much you squeeze out and smooth the PPF, I have experienced small bubbles that rise after everything initially looks smooth. It wasn’t trapped dust, the surface was prepped properly too. This PPF requires you to check it 15 minutes post install and 30 minutes after any adjustments to make sure it stays down. I didn’t expect the B Pillars to do this but sure enough they did. Just make sure to take your time, light squeegee pressure for the initial tack and firmer passes once it begins to set. Make sure to use plenty of tack spray for the edges to flush all soapy water out.
Super easy process to install cut and fitment was perfect. recommend to keep from physical key damaging rhe b pillar
The product looks great and the installation was easy. The instructional video was super helpful.
Make sure you install this in good light so you can line up the slot for the camera. Very simple to install with the video tutorials & can't even notice it's there. Make sure I did these pillars first, to get the hang of it before moving onto the harder PPF's
Easy install fits great.
