Contrary to their name, these mini rockers are a game-changer for protection. This kit comes with everything you need to protect this section of your rockers.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: .5 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesGood quality with timely delivery. No need to search other websites for Tesla products.
United StatesThe fit for the bottom PPF is not exactly match, but Tesbros was willing to send a replacement. Great customer service.
United StatesSuper easy to install. Cleaning the area, degreasing & clay bar took significantly longer than putting on the PPF.
United StatesCustomer service at TesBros is outstanding. Excellent products at a good price. My go-to place for Tesla accessories. Highly recommended.
United StatesEasy to apply! And fits great!
United StatesThis was one of the harder kits for me to get right. I accidentally overlapped the two pieces which made it look like the car was scratched. I peeled off the small piece and had another sent to me. You definitely need this, just be careful with it being 2 pieces when you install it.
United StatesFit was great and easy to install.
United StatesEasy putting it on and looks great!
United StatesGreat product. Easy to apply and glad I have it to protect my car.
United StatesEasy to install I got one side done right for which I was your picture and the other side and I’m dropping while installing so it got messed up and I’m hoping that after contacting customer service they will send me one piece out to replace the other side
