.svg?v=144615871337664008991726520056)
Contrary to their name, these mini rockers are a game-changer for protection. This kit comes with everything you need to protect this section of your rockers.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: .5 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Owning a few white cars before I know how much a slight imperfection such as a rock chip or door ding affects a cars appearance! Installation was straight forward and the ppf look on vehicle is extremely subtle!
I was anxious about the install,but it went smoothly without any issues.. Didn't have to use tack solution, slip solution did the job for me.. Although did add a drop of baby shampoo in distilled water to make slip solution. Would recommend this..
Easy to install plus Tesbro supplied the tools for installing.
I had my eight year old help me with the install and turned out perfect. The PPF is great quality and easy to apply with the bottles and squeegee supplied by Tesbros. I had an issue where I ordered something I no longer wanted and Tesbros customer service was quick and responsive. All around excellent experience and that coming from a pretty hard to please customer!
This was my first experience with ppf and I was a big nervous. The kit was complete and video instructions simplified it even further! This is a great product.
