Avoid paint and car damage from rocks and debris with these clear, easy-to-install kits. It includes ppf kits for your full rockers, rear trunk, headlight and fog-lights, taillights, door edges, and door handles.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 3 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesInstallation is pretty straightforward with the help of watching the videos. After doing a couple sections and getting the hang of it, was able to complete with ease. Definitely recommend.
United Statespackaged well and separated and ready for install
United StatesI have not installed the kit yet but wanted to provide the feedback on their outstanding customer service. I goofed on the first order but Ji was so understanding and applied the discount retroactively to my order. This is the company I would highly recommend not only for their products but the way they treat their customers like bros.
CanadaLike others, I struggled most with the headlights and rear tail lights, everything else went pretty good. The lights are just an odd fit and odd curves. The front were the hardest. I was most worried about the large rockers but they went surprisingly well. The trunk piece was trick as well with the fold. I found the instructions confusing as to when to use the soapy spray versus the tack spray. It will be interesting to see how it holds up and if some of the small tiny bubble work themselves out.
United StatesPerfect set for the Y. Fits perfectly, comes with everything you need (unlike other shops). Peace of mind.
United StatesEverything was easy to install, except for the headlight PPF. I tried several times, watched the install videos, they just don't fit well. Other than that....good stuff!!
United StatesThe PPF was great and easy to install….except for the headlights. I tried several times and watched the install videos, but they’re just not fitting well. Other than that…great stuff!!
