Save yourself the pain of that sight and keep them looking new with this PPF Kit.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesEasy install and perfect fit for my MYLR. Provides plenty of protection to door handle area.
United StatesInside edges at the handle weren’t sticked after spending more than an hour following the video instructions, ppf film should have been cut more precisely leaving a small gap around the door handles.
United StatesThis product was so easy to install, I bought additional sets for friends as a xmas gift.
United StatesThis is quite literally the easier and simplest install. I bought two additional sets for my family to put on their new Teslas.
United StatesKit comes with everything needed. Small squeegee, small spray bottles for slip and tack solution and pre-cut ppf.
United StatesI order one from Amazon. It cost more and the quality not show good and than I order one from Tesbros. The item quality very good and easy to install. Also they have a very good customer service. At the end I order more item from Tebros. I own Tesla Model Y and 3
United StatesI ordered a set initially on Amazon but returned it after receiving other ppf film from Tesbros. The material appears to be high quality and the videos made installation a breeze.
United StatesI love this the ppf the most. It was easy to put on. Highly recommended. Took me over an hour because my car is white and there were a few mints and black specks behind the film because I installed it outside. Wouldn’t notice these if my car was a darker color.
United StatesWith two elementary school kids, this was a must have for me. Great fitment and easy install.
United StatesEasy install, everything you need is included, squeegee, tack and slip bottles and instructions (doubt it is needed but there just in case)
