This kit comes with everything to protect these commonly scuffed and scratched areas.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 1 hour
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
PPF is best installed in a temperature range between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it still persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
United StatesFirst time using PPF. The installation was pretty simple and straightforward. Looks great too!
United StatesI tried applying with spraying the product and being neat about it. Forget it, just spray the heck out of the product and it applies much easier. Over apply the liquid and you are better off. The first one I was tentative and by the time I reached the rest of the panels, it was very simple. Don't be shy about applying the water. Remember the water dries and does not stain.
United StatesSemi-easy to install product. Had a few issues with one panel in the back and the front passenger panel. I kept getting creases (mainly in the back panel) that were really hard to flatten. Manage to get them all excepted for one small one popping out in the back panel every so often.
United StatesThis was a pretty easy installation - even for me! Installation video was great as usual. Had to deal with some "fingers" on the rear doors but after a couple of tries and using the "tack" solution, they're looking good now. I've found that you sometimes have to hold down those persistent fingers for a minute or two before they glue down fully. Bell the dog says hello from Oregon! I'm glad to have that door kick protection now to go with my other Tesbros products.
United StatesI got the front on good but the back were a little harder. So Tesbros is sending free back ones to me to try again. Great company
United StatesEasy install and this is my second installed barn door rocker PPF after I started him in my model Y also my only complaint was it doesn’t cover edge to edge or at least majority of the area where for the price you pay a little more protection can be applied as far as the area wise but overall a good product highly recommend
United StatesAwesome product, easy to install…
United Statesfast shipping, great fitment, easy install instructions. Will order more to keep the car protected!
United StatesVery helpful and corrected sending wrong order right away. Install is very easy.
Awesome! Couldn't ask for a better accessory.
