Installation: Power Trunk (Latest Edition: Hansshow V7) for Model 3

Most customers install this themselves.We recommend watching the how to video to ensure correct usage.

Installation time: 4 hours

Tools needed: 

  • T40 Torx bit
  • T25 Torx bit
  • 8mm Socket
  • 10mm Socket
  • 13mm Socket
  • Ratchet 8mm
  • Wrench 6” impact extension
  • Electrical Tape
  • Painter’s Tape Drill
  • Pry tools (the kit does come with some)
  • Fish wire (the kit comes with a short one, but I prefer using a longer one for pulling leverage)
  • WD40 Silicone Lubricant Gloves
  • Flathead screwdriver
  • Floodlight/flashlight/headlight (a light you can use easily to see in the tight spaces)

How to Video:

Add your Tesla
  • Please select Year

  • Please select Model

  • Please select Trim