Save yourself the pain of that sight and keep them looking new with this PPF Kit.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesEasy to install, just follow the instruction on the youtube video.
United StatesVery satisfied with purchase
United StatesTesbros is among the decreasing number of companies that still focuses on customer service. Once they were notified of a missing part from the package, they immediately responded and sent out the replacement. Go Tesbros!!! You are my first choice for Tesla related products.
United StatesProduct is nice and easy isntall
United StatesVery easy and straightforward, especially after much practice with the full front end PPf.
United StatesEasy to install! Does the job of protecting door handles!!
United StatesProtects and looks super clean
United StatesThese are a must! Easy install and great quality. Cool handles but need protecting.
United StatesEasy to install and protected my door handle from scratch.
United StatesFitment was great and it was an easy install.
