Our mud flaps are a screwless installation and come with everything you need to install in under 5 minutes. On top of that (or rather under that), our kit comes with a custom-cut paint protection film so that the mud flaps won’t damage the paint while it’s on (a common problem for mud flaps since dirt can rest there and cause paint damage).
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: .5 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Yes. The clips require a good amount of force. We recommend using one of our trim tools to leverage and push it in.
PPF is best installed in a temperature range between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us and we can send you a replacement at cost.
Our film is rated for 10 years.
United StatesWhile installing the flaps themselves went well putting on the PPF protection was a pain. It’s not as easy as the video shows. When putting on the flaps after the PPF was installed; the flap made a small cut in one of the PPF strips. While the PPF film a nice idea; not really of much practical use unless you plan to take flap off to use on a different car. Further I don’t think the flaps are as durable as a different brand I had on my first Tesla. My wheel kicked up a rock in a pothole and the rock hit the flap as expected unfortunately the rock actually put a hole in the flap. Good news is the flap did prevent damage to the car. I replaced all 4 flaps from a different company. .
United StatesThese mud flaps are awesome and the pot is such a great bonus to go along side these, 10/10 recommend for anyone who owns a Tesla.
United StatesStraight forward installation, look perfect, and most importantly give you added protection. The included PPF is a bonus.
United StatesGreat Product. Easy install.
United StatesIt was very good perfectly made.
United StatesFast shipping and item exactly as described. Easy to install. Wish I had put these on several years ago!
United StatesI went ahead and installed these today and I cannot believe how amazing they look. Installation was fast, PPF ok course takes a little patience, but the install video was spot on. They absolutely look like they belong on the car, and the quality is absolutely perfect.
United StatesThese are the best looking and fitting mud flaps for the model 3, they had above and beyond with including PPF to protect the paint behind the mud flaps. The install is fast and easy. Would recommend these over all others.
United StatesThe product was amazing! It effectively blocks dirt and grime from the wheels, which helps prevent paint chips, as shown in the pictures. Also It looks good on the car. The only difficulty I experienced was installing the PPF. The slip solution made it harder to keep PPF in ideal location. Fortunately, the tack solution came to the rescue. Overall, installing the mud flaps was no problem. A truly remarkable product!
United StatesEasy to install and look great on my 2019 LR Performance M3. Quick shipping. These are the only ones I’ve seen that use PPF - nice feature
