Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: .5 hours
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesGreat product and easy to install!!!
United StatesNew look for my tesla. Plus protects your tail lights. Application was easy. And tesbros customer service is helpful
United StatesI just installed this yesterday on my car and could not be happier. The pieces were precision cut and fit flawlessly and the install was a breeze (even for a novice like me). Highly recommend this if you are interested in smoked out taillights.
United StatesNot too tinted. Easy to put on. Would recommend
United StatesLove the new look of our taillight. Great quality and easy to apply!
United StatesProduct looks good, but getting the edges to match up is difficult. Would almost be easier if the big section was 1 piece instead of 2.
United StatesSuper easy to install! Just another thing to difference ourselves from every other Tesla model 3 lol
United StatesSo easy to put on. Once you get the hang of tesbros PPF it’s a simple process
United StatesFirst time PPF install and it was painless. Instructions were clear easy to follow. All the tools you need are in the kit. She looks so sexy now.
United StatesPackage came perfectly wrapped and secure. The install was very easy and the PPF was cut perfectly. The tint was not to dark. Perfect experience.
