Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
How to Video:
Free Shipping on US Orders $69+ | Free Express Shipping on US Orders $199+
This kit comes with 4 long and 4 regular trim-to-fit strips for a quick no nonsense install. Your door edges will thank you.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary
Installation time: 30 minutes
Recommended Temperature: 65°F – 75°F
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Installation was really easy and Tesbros provided more than what was needed for Model 3 so don’t have to worry about making mistakes. Most of all, price was reasonable. Highly recommend.
These were pretty simple to install. Must have.
Great product. Sticks to the car very well and protect the edges very well.
This kit offers flexibility but I believe for the Model Y & Model 3, high volume vehicles, these door strips should be pre-cut to length and on separate sheets. It will make installation much easier. I do find the other products from TesBros rock in that they come with everything needed for installation and great video instructions!
If you grew up taking stickers off a stick book only to place them on your face, then it is literally just like that except you need to be more precise. There are more than enough strips in the case you mess up like I typically do on things. Just buy it.
We have a very tight 2 car garage, so the doors of our other cars might touch the wall when parked. Glad to have this kit just incase I need rest the door up against the wall and i'm not afraid of it scratching. It's a very simple install but take your time aligning as you go down the door. Highly recommend this kit!
I installed this item myself. I was able to install it on all four doors. When it was time to wash my car, the edge of the strips were black. I was able to clean it off with the same rag I was using to dry out my car. There is excess edge guard available in case one needs to be replaced with time.
I did have a issue with installing it. I found it difficult to keep from getting bubbles trapped underneath. Likely user ineffectiveness. I am a perfectionist and decided to remove it. For me it was worth the try. Just wish it worked for me.
Product came with detailed instructions. Applying the door edge protector is really easy. I would suggest the instruction can contain some details regarding how to handle the edge area and how to keep the edge area smooth and long lasting.
Works but not purfect.