Free Shipping for US Continental Orders $99+

    DIY Protection Kit for Model Y

    Tempered Glass (9H) Screen Protector for Model 3/Y

    Front Bumper - Sport Mode for Model Y

    Front Bumper - Sport Mode for Model Y

    Plus 20% OFF
    Color: Gloss Black
    Satin Black
    Gloss Black
    Matte Black

    Free Continental U.S. Shipping $99+

    Installation Level: Beginner

    Installation Beginner

    Free Video Guides

    All Tools Included

    USA Support

    Transform your Model Y’s simple bumper with this unique look

    Inspired by the vents from performance cars, this wrap "elon"-gates the fog lights giving the illusion of the performance.  

    • Easy DIY peel & apply application (see below)
    • Tools & instructions included
    • Lasts 5+ years
    • Designed and made in the USA

    Includes:

     

    • Driver Fog Light
    • Passenger Fog Light
    • Left lip
    • Right lip
    • Squeegee
    • Install Guide

    Specs:

     

    • Made with Avery Dennison Vinyl
    • Fits 2017+ Tesla Model Y

    Most customers install this kit themselves. Some experience with vinyl wrap installation is helpful, but not necessary.

    Installation time: .5 hours

    Recommended Temperature: 65°F – 75°F

    Tools needed: heat gun / hairdryer recommended but not required.

    How to Video: 

    Do I have to disassemble parts of the car to apply the wrap?

    No, not at all. The wrap kit allows you to apply a professionally looking wrap without disassembly.

    I overstretched the vinyl. What can I do?

    Unless you REALLY overstretched it, you can get it back to normal stretch. Vinyl is memory-based so if you just heat it, it will revert back to its original state. Use a heat gun or hairdryer and keep your heat moving in the area. You’ll see it shrink back. If you don’t see that it is shrinking back, you may have added too much heat and will have to use your extra piece.

    How do I use a heat gun when applying vinyl?

    You can use a heat gun or a hairdryer but you want to use a heat gun whenever you need to stretch or conform around awkward areas. When using heat, don’t stay in one area. Keep your gun moving and roughly 6 inches away.

    Does it come with everything I need to install?

    The kit comes with everything you need, except a heating source. We recommend using a heat gun or even a hairdryer if needed.

    Do I need any experience?

    Our DIY kits are designed with beginners in mind. You do not need prior knowledge to install these kits, however, we do recommend studying our videos and familiarizing yourself with vinyl to get the most out of your kit!

    Can I go through and automatic car wash?

    It’s recommended to only hand wash your Tesla. Due to automatic carwashes being brushless, they tend to use heavy chemicals to break things down which can be harmful to the vinyl.

    Easy 30-day Returns. We're giving you 30 days to see if the kit works for you. Wrong color? Not for you? Get an exchange or refund. To receive a full refund, the product must not be used. If unused or sealed, we will refund 100% minus the shipping costs. For full details on policies, please visit our Exchanges and Return Page.

    Lifetime Vinyl/PPF Warranty: Have an issue with our kits? We'll send you a replacement. Just cover the shipping. Contact us at: support@tesbros.com
    4.8
    Rated 4.8 out of 5 stars
    Based on 57 reviews
    Total 5 star reviews: 51 Total 4 star reviews: 1 Total 3 star reviews: 5 Total 2 star reviews: 0 Total 1 star reviews: 0
    91%would recommend this product
    Slide 1 selected
    57 reviews
    • CS
      Chris S.
      Flag of United States
      Verified Buyer
      1 month ago
      Rated 5 out of 5 stars
      love the new look

      easy to install with a little patience and really dig'n the new look

    • HT
      Hoang Thanh L.
      Flag of United States
      Verified Buyer
      3 months ago
      Rated 4 out of 5 stars
      Great Look but Difficult to Install

      The end result looked great but the process was difficult. I wish the video showed more close-up shots to see where the initial contact points were. There were plenty of DIY fixes implemented.

      For the lip, the vinyl overlapped one another more than what the instructing video described. I was reluctant to cut the excess because of the fear of removing too much. The lip vinyl was also not able to cover all of the bottom of the lip, leaving the white paint exposed, which was not a good look. I did not want to stretch the vinyl as it was not recommended to. I was able to cover up the exposed paint with the excess vinyl from the print out (doesn't not look great close up but better than leaving the white exposed).

      For the fog vinyl, I could not get both sides to look the same with the curvature of the vent at the bottom.

      I was grateful that I received backup panels in case I messed up.

    • ST
      Siju T.
      Flag of United States
      Verified Buyer
      5 months ago
      Rated 5 out of 5 stars
      Sport mode

      Looks great. For a first time diy-er it's not as easy as it looks but a lot of patience you can get it done. Looks great even with a lot of first time diy imperfections

    • SB
      STEVE B.
      Flag of United States
      Verified Buyer
      7 months ago
      Rated 5 out of 5 stars
      Sport bumper n pillar delete

      Great precision cuts easy install great directions

    • DS
      Danny S.
      Flag of United States
      Verified Buyer
      8 months ago
      Rated 5 out of 5 stars
      Thanks TesBros!

      Excellent all the way across

    Reviews LoadedReviews Added