Protect this vulnerable area of your car from damage with a full rocker panel of impact-resistant PPF.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 1 hour
Recommended Temperature: 65°F – 75°F
Tools needed:Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesVery easy and straightforward to install
United StatesGood deal. Went on just like the YouTube video. Meticulous to do, but it works.
AustraliaOrder shipped promptly and arrived in short order.
AustraliaI had suffered a few scrapes from tree branches on the rockers so, after touching up the scratches, I added the rocker PPF. It was relatively easy to install and the instruction video was of great assistance. I recommend this product.
United StatesI was able to install the whole thing in under 2 hours, and the video provided is very helpful. It provides clear instructions on where and how to start, which makes the installation very intuitive. Huge fan of this product. The TESBROS team always goes above and beyond product design!
United StatesThis was easy to install but tricky if you got T-Rex arms. A second set of hands would help tremendously with the longer pieces.
United StatesAnother amazing product offering from Tesbros. I wasn't sure if I want to tackle this project, but the videos made it easy to follow along. Highly recommended.
United StatesEverything was cut perfect, easy instructions and I had everything I needed to get the job done in a little over an hour with quality. Didn’t count the time to wash the car or remove my mud flaps. Excellent quality!
United StatesJust watch the instruction video once and the installation is so easy. It's actually fun to do it.
United StatesAfter having my Model 3 for about 9 months I noticed many rock chips from normal everyday driving. I had to have this. It isn’t the easiest install, but certainly a job anyone with patience and time can complete. The videos are a great reference. Just take your time with the bottom rocker pieces 4 and 5. They will need to dry out for an hour or two before you can complete tuck the bottom edges. It’s a great solution for those who didn’t PPF the entire vehicle.
