Protect this vulnerable area of your car from damage with a full rocker panel of impact-resistant PPF.
Most customers install this kit themselves. Some experience with PPF installation is helpful, but not necessary.
Installation time: 1 hour
Recommended Temperature: 65°F – 75°F
Tools needed: Simply add water to provided installation bottles.
How to Video:
Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
We recommend waiting at least 24 hours but 48 hours to be safe.
Yes, everything you need is provided in the kits. All you’ll need to add is water to the slip and tack bottles.
No, our kits come pre-cut to make installation easier for you!
You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
PPF is easier to adjust since it is a wet install compared to vinyl which is a dry install. If you do make a mistake, reach out to us, and we can send you a replacement at cost.
Our film is rated for 10 years.
Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
United StatesThe product arrived on time from the company which is nice. Even though it’s winter I installed it. It wasn’t hard but it wasn’t easy either. Having someone to assist helps.
United StatesI wouldn't call the install process easy, but it's not hard either. Make sure you prep correctly (wash/clay bar) and take your time. Everything worked really well and the tacking solution helped for the edges. I would watch a few videos showing to to install. Very happy with the results!
United StatesI live in an area with snow so this kit is a must have. Everything went as planned, install video was great. I had to tack and stretch the do9or piece a little bit to get to the edges lined up as described in the video. Thanks Tesbros, this kit is excellent.
United StatesAnother great product from TesBros. Used their chrome delete kit in the past and this product was great as well. Quality material and great install video. Easy Install
United StatesThis was my first time installing any sort of PPF. But after watching the tutorial on YouTube the install went amazingly well. It's very straightforward and the PPF is very forgiving. If you mess up or see bubbles or debris you can just peel it off and do it over again without losing the adhesion. Will be purchasing more product from Tesbros!
